Untitled Document
 
Home About Us Product Overseas Companies Enquiry Contact Us
Untitled Document
 
 
 
Installation Testers
We are a leading Manufacturer & Exporter of Installation Testers such as Insulation Resistance Tester, RCD Tester, Earth Loop Tester, Earth Resistance Tester, Combination Tester and Automatic Installation Tester from India.
Insulation Resistance Testers
Item Code: IRT-S
The insulation resistance tester IRT-S is engineered for accurate measuring of LV-installations and appliances according to the EN 61557 regulation. The tester has been developed to measure voltage, frequency and continuity. Also insulation resistance of high sensitive parts and even heavy machines or ground cables can be measured easily with the four different test voltages.

Following tests:

  • Insulation resistance with a test voltage of 100 VDC
  • Insulation resistance with a test voltage of 250 VDC
  • Insulation resistance with a test voltage of 500 VDC
  • Insulation resistance with a test voltage of 1000 VDC
  • Partial resistance of earth connection (200 mA)
  • Voltage
  • Frequency

The IRT-S has an internal memory with 500 locations for storing the measured values. These stored values can easily be transferred to a PC (via the RS232 port).

Including:

  • Test leads
  • Test probes
  • Alligator clamps
  • Manual
 
 
Click on image to enlarge
RCD Testers
Item Code: RCT-S
The RCD-tester RCT-S is engineered to test the RCD completely to the European regulations EN 61557 and EN 61010 (also selective RCD’s). RCD’s sensitive to sinusoidal error currents can be tested with the measuring method of this tester as well.

Following tests:

  • Contact voltage
  • Trip current of the RCD
  • Trip time of the RCD
  • Voltage measuring Phase – Earth
  • Frequency
Testing the RCD is of essential importance. The regulations even subscribe the need to test RCD’s and (earth) leakage protection devices periodically. In many cases the RCD is supposed to trip within 300 ms after detecting an earth leakage in the top half of the nominal trip current. This means that in case of a 30 mA RCD, within 300 ms the voltage needs to be switched off automatically when the earth leakage is between 15-30 mA.   

Including:

  • Network test lead
  • Manual
 
Click on image to enlarge
Earth Loop Testers
Item Code: ELT-S
The Earth Loop Impedance Tester ELT-S has been engineered especially for measuring the phase rotation, earth loop resistance via neutral (N), earth loop impedance via phase (L) and net impedance of LV-installations, all according to the EN 61557 regulation. The instrument is fully electronic and can perform line and loop impedance on single- or three phase systems. It is also possible to measure the loop resistance between neutral and earth without tripping the RCD’s.

Following Test:

  • Earth loop impedance
  • Earth loop resistance between neutral and earth
  • Prospective short circuit current (Ipsc)
  • Net impedance between phase and neutral lines and between two phase lines on a three phase system
  • The condition of the protective earth potential (safe or dangerous)
  • Voltage
  • Frequency three phase rotation field

 

The ELT-S has an internal memory with 500???locations for storing the measured values. These stored values can easily be transferred to a PC via the RS232 port.


Including:

  • Network test lead
  • Manual
 
Click on image to enlarge
Earth Resistance Testers
Item Code: ERT-S
The Earth Resistance Tester is developed for measuring earth resistance, possibly with the use of a special current clamp for measuring the soil resistivity on LV-installations according the EN 61577 regulation.   

Following Test:

  • 2-Point earth resistance
  • 3-Point earth resistance
  • 4-Point earth resistance
  • Earth resistance by current clamp (‘Utility method)
  • Soil resistivity (‘Wenner’ method)

The integrated ‘Utility’- measurement is especially designed for measuring partial earth resistance at parallel earth connections. This is being done by using a current clamp. This clamp is optional (ERT-a7). The ERT-S has an internal memory of 500 locations for storage of the measured values. These stored values can easily be transferred to a PC (via the RS232 port). 

Including:

  • Test lead green
  • Test lead red
  • Test lead blue
  • Test lead black
  • Earth pins
  • Cable support
  • Manual.
 
Click on image to enlarge
Combination Testers
Item Code: CMB-S
The Combination Tester CMB-S or Combi Compact is one of the most compact portable combitesters available. The instrument is designed especially for installers or maintenance people who frequently need to check or inspect LV-installations after modification, initial inspection or addition. The tester can inspect, measure and test different kinds of RCD’s (normal and selective), net or loop impedance and (insulation) resistance on LV-installations, according the EN 61557 regulation. Voltage and frequency can also be measured by the CMB-S.
 
Click on image to enlarge
Combination Installation Testers
Item Code: Instaltest-XE
The Instaltest XE is a simple and compact installation tester combining EN 61010 and EN 61557. The tester has a huge number of integrated features, each driven by separate accessories. The user selects a measurement easily using the rotary switch. The selected test is also clearly displayed in the large LCD display. Trip time and contact current of the RCD, impedance testing, insulation resistance and phase sequence are some of the functions.

Following tests:

  • Insulation resistance
  • Continuity
  • Contact voltage
  • Trip time of RCD
  • Automatic RCD-test
  • Trip current of RCD
  • Earthloop impedance without tripping RCD
  • Phase rotation
  • Lux (optional accessory)
  • Current
  • Earth resistance
  • Line impedance (Z-line)
  • Earthloop impedance (Z-loop)
  • Voltage

Including:

  • Manual
  • Alligator clamps
  • Strap
  • Carrying bag
  • Test leads
  • Rechargeable batteries
  • Tip commander
  • Charger
  • Schuko plug cable
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • Strap
  • Carrying bag
  • Test leads
  • Rechargeable batteries
  • Tip commander
  • Charger
  • Schuko plug cable
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • Carrying bag
  • Test leads
  • Rechargeable batteries
  • Tip commander
  • Charger
  • Schuko plug cable
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • Test leads
  • Rechargeable batteries
  • Tip commander
  • Charger
  • Schuko plug cable
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • Rechargeable batteries
  • Tip commander
  • Charger
  • Schuko plug cable
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • Tip commander
  • Charger
  • Schuko plug cable
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • Charger
  • Schuko plug cable
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • Schuko plug cable
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • RS232 and USB-cable
  • Test probes
  • Software InstalLink PRO
  • Test probes
  • Software InstalLink PRO
  • Software InstalLink PRO
 
Click on image to enlarge
Automatic Installation Testers
Item Code: Instaltest-AT
The Instaltest AT is a versatile and easy to use installation tester according EN 61010-1 and EN 61557. In this installation tester Autotest is integrated. A simple push on the button displays an organized program showing which tests are run automatically. The results are immediately stored and transported to the software where they will be transformed into a certificate. Available measurements including insulation resistance, RCD testing, impedance testing (Z-loop and Z-line) and earth resistance.   

Following test:

  • Insulation resistance
  • Continuity
  • RCD Trip current
  • RCD Contact voltage
  • RCD Trip time
  • Earthloop impedance without tripping RCD (Z-loop)
  • Line impedance (Z-line)
  • Automatic Z-loop & Z-line limits by selected security
  • Voltage
  • Frequency
  • Earth resistance
  • Soil resistivity (adapter required)
  • Varistor test 
  • Phase rotation

Including:

  • Manual
  • Quick start guide
  • Carrying bag
  • USB cable
  • Strap
  • Rechargeable batteries
  • Test probes
  • Battery charger
  • Test leads
  • RS232 cable
  • Schuko plug commander
  • Software InstalLink Pro
  • Carrying
  • Bag
  • Tip commander
  • Test leads
  • Charger Test probes Alligator clamps
 
Click on image to enlarge
Automatic Installation Testers
Item Code: Instaltest-XA
The Instaltest XA combines simplicity with speed, a unique combination. The Instaltest XA has the possibility to store 50 results per measurement, called Autosequence, complete inspections are up to 5 times faster. The Instaltest XA has a multitude of functions, including earth leakage test, (including type B), insulation resistance testing, impedance testing (Z-Loop and Z-line), phase sequence, lux, earth resistance, fuselocator etc. The Instaltest XE offers the user all comforts of rapid testing with a high reliability.

Following test:

  • Insulation resistance
  • Continuity
  • RCD trip current
  • RCD trip time
  • RCD contact voltage
  • Earthloop impedance (Z-loop)
  • Net impedance (Z-line)
  • Voltage
  • Current (leakage current)
  • Resistance
  • Frequency
  • Earth resistance (3-point)
  • Soil resistivity (adapter required)
  • Earth resistance with current clamp
  • Earth resistance with 2 current clamps
  • Varistor test
  • Phase rotation
  • Lux measurement (optional accessory)
  • Cable/ fuse detection (optional accessory)
  
What is Autotest ?

  • Autotest will test an installation automatically and optimally.
  • There are no limits in combining measurements on a system with the Autotest mode.
  • The user can select any individual test, which will simplify the use even more.
  • Comments, suggestions and remarks can be added to the tests to make the use and testing significantly easier.
  • Any combination of tests can be selected and stored.
  • Limiting values can be added, to show immediately a OK or reject symbol.
  • There are several programs available which apply to most of the occurring situations.

Including:

  • Manual
  • Quick start guide
  • Carrying bag
  • USB cable
  • Strap
  • Rechargeable batteries
  • Test probes
  • Battery charger
  • Test leads
  • RS232 cable
  • Schuko plug commander
  • Software InstalLink PRO plus.
 
Click on image to enlarge
 
 
 
Untitled Document
Home About Us Product Overseas Companies Enquiry Contact Us
Website designed & Maintained by   
   Copyright © All Rights Reserved @ JMD Precision Equipment Pvt . Ltd. 2013-14